the revival of the Brownie Hawkeye project

This time, photo scans with sprocket holes intact. The very reason why i revived this project was because I could finally get decently scanned images with the sprockets intact. And since the brownie is a medium format point and shoot, it exposes the part of 35mm film around the sprockets too. Unlike SLRs. This makes the picture most magical...

the results are never sharp in this project. And that is due to the following reasons.
1. The fixed shutter speed of the brownie (which is pretty slow)
2. the meniscus lens aberrations towards the edges, and I somehow never manage to load the 35mm film centrally through my homemade 35mm film adapter...

The results are as follows:









All this scanning was possible because of a unique tubular contraption that keeps negatives in place and enables me to take pictures of the same through my digital camera. Obtaining the digital positive is the final stage of the process.

This is another shuttlebox attachment for my 400D with one end holding the negative and the other end open to fix on the lens. Ideally, this tube is to be held with the negative exposed to a bright source of white light, and the open end on the lens. The length of the tube will depend upon the minimum focus length of the lens in use.